PRODUCTS
  HVAC Analyser Guide
  Air Velocity
  Batteries & Fuses
  Carbon Monoxide
  Cases
  Combustion Analysers
  Clamp Meters
  Current Accessory Heads
  Data Logger
  Diode Accessory
  Field Packs
  Gauges - Digital Manifold
  Handles & Adaptors
  Humidity
  Insulation Tester
  Leads & Accessories
  Leak Detection - Combustion
  Leak Detection - Refrigerant
  Modular Heads
  Multimeters
  Pocket Instruments
  Pocket Tools
  Pressure
  RPM Meters
  Spare Parts
  Static Pressure
  Superheat & Subcooling
  Temperature
  Thermocouples
  Vacuum
  Voltage Accessory
  Weighing Scales
Product Search

 

SUPPORT
   Brochures/Flyers
   Software/Firmware
   Operations Manuals
   AAT3
 
SEMINARS
 

MEMBERS
 User:
 P/W:

[Regsiter!]
[Forgot your password?]
 
 
PRODUCTS
Category: our product range >>Thermocouples

Sort by:
Displaying page 1 of 2 |

K-Type thermocouple 3 Metre Extension - Code : ATEXT10

The ATEXT10 is a K-type thermocouple extension cable designed to give you that extra reach you need when measuring temperatures. It's 3 metres in length and has a female k-type port on one end and the male plug on the other. It's great for use with rigid thermocouples.

SPECIFICATIONS

  • Thermocouple conductors: K-type nickel chromium/nickel aluminum.
  • Insulation: Calibration and atmosphere will affect maximum useful temperature in applications. The 24 GA ( .020 ) Teflon FEP coating is designed to withstand a maximum continuous use at 400F ( 204C).
  • Plug: K-type thermocouple male mini plug & K-type thermocouple female mini plug

/ ea

Pipe Clamp K-Type Thermocouple - Code : ATC1 & ATC1R

The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 9.5 to 35mm open jaw range. The ATC1R has a open jaw range of 3.0 t0 20mm. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. The ATC1 or ATC1R can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached. The sensors large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds. Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces

Specifications

  • ATC1 jaw opening 9.5mm to 35mm
  • ATC1R jaw opening  3.0mm to 20mm
  • Temperature Range -45 to 125C (both)
  • Accuracy: +/- 2C ; 0.5C after field calibration @ 0 to 80C
  • Max 125C (probe)
  • Tough single moulded hand grips
  • Plug: K-type thermocouple male mini plug.
  • Typical stabilization time: less than 30 seconds

/ ea

Pipe Clamp K-Type Thermocouple - Code : ATC2

The ATC2, K-type, pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 10 to 55mm jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.


Specifications

  • ATC2 jaw range: 10mm to 55mm pipe diameter
  • Accuracy: +/- 4F (2C) ; 1F (0.5C) after field calibration, 32 to 176F (0 to 80C)
  • Temperature range: -46 to 82C
  • Thermocouple conductors: K-type nickel chromium / nickel aluminum.
  • Probe insulation and clamp material: Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 180F (82C).
  • Plug: K-type thermocouple male mini plug.
  • Typical stabilization time: less than 60 seconds

/ ea

K-Type Thermocouple - Code : ATR1

The ATR1, K-type thermocouple is perfect for testing the temperature of air flowing through ductwork. The long rod can reach the middle of ducts for accurate air temperature readings of the entire cross-section. The large handle gives the HVAC/R technician the leverage to push the sharp tip through soft ducts. The ATR1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

SPECIFICATIONS

  • Rod length: 4.75 inches
  • Rod diameter: 0.125 inches
  • Thermocouple cable length: 1.2 metres
  • Accuracy:
    1F (-238 - 32F); 0.5C (-150 - 0C)
    3F (32 - 212F); 1.5C (0 - 100C)
    4F (212 - 932F); 2 (100 - 500C)
    6F (932 - 1472F); 3.2C (500 - 800C)
  • Temperature range: -238F 1472F (-150C 800C)
  • Thermocouple conductors: K-type nickel chromium / nickel aluminum.
  • Plug: K-type thermocouple male mini plug

/ ea

K-Type Thermocouple - Code : ATA1

The ATA1 K-type thermocouple can clip to HVAC/R equipment for convenient placement and hands free testing.

SPECIFICATIONS

  • Accuracy: +/- 4F (2C) ; 1F (0.5C) after field calibration, 32 to 176F (0 to 80C)
  • Temperature range: -50 to 400F (-46 to 204C)
  • Thermocouple conductors: K-type nickel chromium / nickel aluminum.
  • Probe insulation: Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation is designed to withstand a maximum continuous use at 400F (204C).
  • Plug: K-type thermocouple male mini plug

Download Specification and Operating Data


/ ea

K-Type Thermocouple - Code : ATB1

SPECIFICATIONS

  • Accuracy: +/- 4F (2C) ; 1F (0.5C) after field calibration, 32 to 176F (0 to 80C)
  • Temperature range: -46 to 204C
  • Thermocouple conductors: K-type nickel chromium / nickel aluminum.
  • Probe insulation: Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation is designed to withstand a maximum continuous use at 204C
  • Plug: K-type thermocouple male mini plug

Download Specification and Operating Data


/ ea

Displaying page 1 of 2 |