PRODUCTS
  HVAC Analyser Guide
  Air Velocity
  Batteries & Fuses
  Carbon Monoxide
  Cases
  Combustion Analysers
  Clamp Meters
  Current Accessory Heads
  Data Logger
  Diode Accessory
  Field Packs
  Gauges - Digital Manifold
  Handles & Adaptors
  Humidity
  Insulation Tester
  Leads & Accessories
  Leak Detection - Combustion
  Leak Detection - Refrigerant
  Modular Heads
  Multimeters
  Pocket Instruments
  Pocket Tools
  Pressure
  RPM Meters
  Spare Parts
  Static Pressure
  Superheat & Subcooling
  Temperature
  Thermocouples
  Vacuum
  Voltage Accessory
  Weighing Scales
Product Search

 

SUPPORT
   Brochures/Flyers
   Software/Firmware
   Operations Manuals
   AAT3
 
SEMINARS
 

MEMBERS
 User:
 P/W:

[Regsiter!]
[Forgot your password?]
 
 
PRODUCTS
Category: our product range >>Carbon Monoxide

Sort by:
Displaying page 1 of 1 |

The Plumbers Pack

NOT AVAILABLE -  A SPECIAL combination of products for plumbers to do real testing and measurement. Save a heap on this KIT and Includes a BONUS Inspection mirror and Case to pack it all into.

Pack includes 

  • Carbon Monoxide testing meter: Product Code: ACM3. Use the hand pump to sniff around heat exchangers for leaks. It is also sensitive enough to do walk around testing and reads out in parts per million [PPM]. Click for the Operators Specs.
  • Dual Port Manometer: Product Code: ADMN2. includes hoses, brass fitting and plastic barb adaptors. Measure from any one port or measure differential pressure using both ports. Suitable for LPG and NG pressure readings. Also use for static pressure measurement. Click for the Operators Specs.
  • Combustion Checker: Product Code: AOX2. Measures % Oxygen & % CO2 [Carbon Dioxide] It also has a temperature selection for use with combustion testing but also will receive any K-Type thermocouple for other temperature measurements. Includes a High Temp Thermoucouple Suitable to 500 oC. Product Code: ATBF1. Click for the Operators Specs.
  • To read your accessory heads we have included the Electronic Handle. This is useable on all other available accessory heads to expand your KIT. Click for the Operators Specs. Enquire if you want to go "wireless" as we have a handle and transmitter pack for these accessories. 

Hit the enquire button to find out where to get one as stock will be limited!



Carbon Monoxide Meter- Code : SCM4

A must for all Gas Installers, Gas Plumbers and Service Technicians that need to check gas heating systems. Use this instrument in and around the Office or Factory to check the CO levels. Meter is quick enough for "walk through" sensing inside heated zones. Use the hand pump optional accessory to sniff out leakage sources. Meter has New user replaceable "SMART" sensor. indicated on your display.

   

Features :

  • Each product comes with a Certificate of Conformity for Calibration traceable to National Institute for Standards & Technology [NIST] which is controlled by ISO-9001
  • Fast electrochemical sensor measures 0 to 1000 ppm CO
  • 2000 ppm CO with 5 min maximum exposure time
  • Calibrate/Zero SCM3 to ambient quickly (when CO levels are below 5ppm) with the ZERO button.
  • Factory calibrated at 205 ppm 
  • Audio and visual alarms w/ mute
  • Bright-blue, backlit dual-display with MAX and real-time measurements displayed
  • Rubber Boot with magnetic hanger for hands-free operation
  • Auto Power-Off (APO) to extend battery life
  • Check approximate % of battery life remaining by holding MUTE for 2 seconds
  • Runs on a standard 9V battery (included)
  • Use option pump (AOXP2) for remote / flue gas testing
  • Warranty two [2] years on meter. We do not warrant Sensors due to nature of use.

The "Flue Test" and Remote Testing - Requires Optional AOXP2 flue gas pump
Too much carbon monoxide (CO) in flue gas is one indication to field technicians that combustion is incomplete.SCM3_flue_vector_art

Use the model AOXP2 pump to extract samples from hard to reach places or from locations where the temperature is high (such as a flue). For potentially high concentrations of CO, pump slowly and stop if the measurement approaches 2000PPM.

Carbon monoxide concentrations will begin to show in two or three squeezes. For final reading, pump until the reading stabilizes, about 30 squeezes. Press MAX on SCM3 to hold the highest reading.

NOTE: To make an accurate assessment that combustion is within manufacturer's specifications, in addition to CO ppm, you also need to measure flue gas %O2 (%Oxygen), Temp, %CO2 (%Carbon Dioxide) and sometimes %EA (% Excess Air).

To tune combustion equipment, checkout our SOX2 meter for measurements required.


/ ea

Carbon Monoxide Accessory - Code : ACM4

The CO accessory can be part of your kit, use it with our electronic handle and read carbon monoxide levels instantly. The Accessory Head is just right to use with the Electronic Handle as shown here or logging with our HG3 Analyser.

                                                Code: EHDL1

A must for all Gas Installers, Gas Plumbers and Service Technicians that need to check gas heating systems.

Use this instrument in and around the Office or Factory to check the CO levels. Meter is quick enough for "walk through" sensing inside heated zones.

Use the hand pump optional accessory to sniff our leakage sources.

Features

  • Each product comes with a Certificate of Conformity for Calibration traceable to National Institute for Standards & Technology [NIST] which is controlled by ISO-9001
  • Fast enough to find CO sources in 'Walk Around Mode'
  • Response time <70 secs to 90% of reading
  • 2 pin sensor for better performance & User replaceable
  • Auto-Off can be disabled for data logging
  • Select real time or average
  • Range: 0 to 1000 PPM (2000PPM with 5 minute max exposure time)
  • Accuracy: 0-35 PPM 5% reading 2 PPM after zeroing
  • Sensor type: Electromechanical (specific to CO)
  • Use optional pump (AOXP2) for remote / flue gas testing
  • Warranty two [2] years on meter - We do not warrant Sensors due to nature of use.
 

What's Included

  • Sensor cap for tube attachment
  • Calibration screw driver

/ ea

Displaying page 1 of 1 |