PRODUCTS
  HVAC Analyser Guide
  Air Velocity
  Batteries & Fuses
  Carbon Monoxide
  Cases
  Combustion Analysers
  Clamp Meters
  Current Accessory Heads
  Data Logger
  Diode Accessory
  Field Packs
  Gauges - Digital Manifold
  Handles & Adaptors
  Humidity
  Insulation Tester
  Leads & Accessories
  Leak Detection - Combustion
  Leak Detection - Refrigerant
  Modular Heads
  Multimeters
  Pocket Instruments
  Pocket Tools
  Pressure
  RPM Meters
  Spare Parts
  Static Pressure
  Superheat & Subcooling
  Temperature
  Thermocouples
  Vacuum
  Voltage Accessory
  Weighing Scales
Product Search

 

SUPPORT
   Brochures/Flyers
   Software/Firmware
   Operations Manuals
   AAT3
 
SEMINARS
 

MEMBERS
 User:
 P/W:

[Regsiter!]
[Forgot your password?]
 
 
PRODUCTS
Category: our product range >>Combustion Analysers

Sort by:
Displaying page 1 of 1 |

Combustion Check & Flue Gas Analyser - Code : SOX3

Quickly  check combustion equipment against manufacturer specs.  Include the parameters you need without the costly extras. The SOX3 Combustion Check meter does measurements and calculations  for (% O2 and flue temperature, % CO2, and % EA for oil, natural gas and propane).  Plus it calculates combustion efficiency, has an automatic electric pump, has a custom fuel input to work on any non-conventional heater. This economical Flue Gas Analyser is a must for all heat technicians in the service field. The Key feature is the replaceable sensor Code: RS02. The meter will indicate when this is due, eliminating frustrating errors due to poor sensor function.

Features

  • User replaceable Smart sensor -SOX3 indicates user when to change
  • Measures %OČ and stack temperature
  • Calculates %COČ and %Excess air (%EA)
  • Display %OČ, %COČ, or %EA and temperature
  • Choose from  four display modes: H - Hold, MAX, MIN or Realtime
  • Fuel types measured: Natural Gas, Oil #2 and Propane
  • Auto Power Off & Back Light  

Specifications

COČ  - Carbon Dioxide

  • Range: 0 to 25%
  • Accuracy: 0 to 25%  +/-0.3% (calculated)
  • Resolution: 0.1% COČ

OČ  - Oxygen

  • Range: 0 to 25% OČ
  • Overload 30% OČ
  • Accuracy:  0 to 25% +/-0.3% @ 22.2 °C 20.9 % OČ ambient
  • Resolution: 0.1% OČ

Temperature

  • Range: -50°C to 538°C
  • Accuracy: +/-0.6% + 1.7°C after field calibration
  • Resolution: 0.1° C

What's Included

  • Combustion Check  - SOX3
  • Barrel and Thermocouple Handle - RSOX3
  • Threaded Barrel Lock - RCONE1
  • Filter accessory kit - RAOX9
  • Padded, Blow-molded Case

Warranty two [2] years on meter - We do not warrant Sensors due to nature of use.


/ ea

Combustion Check Accessory Head - Code : AOX2

NOT AVAILABLE - Check back later

The AOX2 measure oxygen in the air for combustion analysis.  AOX2 also computes %COČ and measures stack temperature.

Features

  • Measures %OČ Oxygen and stack temperature
  • Calculates % COČ Carbon Dioxide
  • Choose from  four display modes: H - Hold, MAX, MIN or Realtime
  • Fuel types measured: Natural Gas or Oil #2
  • Auto Power Off

Specifications

COČ  - Carbon Dioxide

  • Range: 0 to 25%
  • Accuracy: 0 to 25%  +/-0.3% (calculated)
  • Resolution: 0.1% COČ

OČ  - Oxygen

  • Range: 0 to 25% OČ
  • Overload 30% OČ
  • Accuracy:  0 to 25% +/-0.3% @ 22.2 °C 20.9 % OČ ambient
  • Resolution: 0.1% OČ

Temperature

  • Range: -50°C to 538°C
  • Accuracy: +/-0.6% + 1.7°C after field calibration
  • Resolution: 0.1° C

Warranty two [2] years on meter - We do not warrant Sensors due to nature of use.

What's Included With AOX2

 

What's Included

  • AOX2P - Hand Pump
  • Water trap
  • 5 x Filters
  • 2 x O-Rings
  • "C" Clips
  • Calibration Screw driver 
  • ATBF1 - Hi Temp K-type Thermocouple

/ ea

HVAC Guide System Analysers with Combustion Tests

 

Click here to link over to the HG2 & HG3 page



Displaying page 1 of 1 |