RHD1 Replacement Heated Diode Refrigerant Sensor
CODE: RHD1
Click to enlarge
RHD1 Replacement Heated Diode Sensor
This replacement sensor is suitable for the Fieldpiece Heated Diode Refrigerant Leak Detector models DR58 & SRL8 
Sensor Installation for DR58
1. Ensure your DR58 is powered off.
2. Remove the 3 screws of the sensor cap.
3. Pull the sensor cap away from the back case.
4. If replacing, pull out the old sensor.
5. Push new sensor (RHD1) into pin holes. Pin orientation does not matter.
6. Push sensor cap back onto back case and secure with the 3 screws.
7. If replacing, hold and SENSITIVITY 5 sec to reset sensor hours.
Hold ZERO to confirm or to cancel.
(RHD1)
| SKU | RHD1 |
| Model # | RHD1 |
| Brand | Fieldpiece |
| Shipping Weight | 0.1000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.100m |
| Shipping Length | 0.100m |
| Shipping Cubic | 0.001000000m3 |
| Unit Of Measure | ea |
Warranty excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Case etc
Be The First To Review This Product!
Help other FIELDPIECE AUSTRALIA visitors by writing reviews for products you have used or purchased.
